A Frigidaire Dryer GLEQ2152ES0 in Alliance, OH was shutting down after a few minutes with flashing lights and an ‘Ad’ message. Replacing the heating element assembly, bearing kit, belt, and idler pulley restored normal operation.
The front-left burner stopped heating due to a corroded wire lead. We installed a new element and repaired the connection.
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
The washer was faulting from oversized loads and a stretched, slipping drive belt. We replaced the belt and advised proper 2/3-full loading.
Disposal wouldn’t turn on and the sink was backing up. Cleared a jam and reset the unit, restoring normal grinding and drainage.
Agitator wasn’t moving and the basket wouldn’t engage. Replacing the wash plate and spin hub restored proper agitation and spin.
The refrigerator section stopped cooling while the freezer worked. Replaced the fridge evaporator cover (with new fan and sensor), cleared and updated the defrost drain and heat probe.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
The GE washer’s lid lock failed, preventing cycles from starting. Replacing the lid lock assembly restored normal operation.