We responded to a Samsung range repair call on William Penn Avenue Northeast in Hartville, OH. The customer was getting a C-F0 error code when trying to start the oven — it wouldn’t ignite and threw the code about a minute after pressing start. What we found inside made this repair more complicated than expected. … Read more
A Canton homeowner called us about their Kenmore range overheating despite already replacing the temperature sensor. We found visible damage to the main control board and an F10 error code indicating the real culprit behind the persistent overheating issue. The Problem The customer reported their oven was overheating and running too hot. They had already … Read more
Carmen contacted Louisville Appliance Repair about her electric oven not heating properly at her North Canton home. After a thorough inspection, we found that all major components were functioning within normal specifications. The Problem Carmen contacts Sam from Louisville Appliance Repair about an issue with her electric oven not heating properly. Diagnosis We inspected the … Read more
A Canal Fulton homeowner called about their Frigidaire range burners that would start to get hot but then shut themselves off and restart continually. After examining the LFEF3048QFA unit, we found the cycling behavior was actually normal operation designed to maintain consistent temperatures. The Problem The customer reported that stove burners start to get hot … Read more
A GE range in Leesburg needed a front right burner and switch replacement. The customer reported the burner wasn’t heating properly, and our diagnosis confirmed both the heating element and infinite control switch had failed. The Problem The customer contacted us because their GE range needs FR burner and switch. The front right burner was … Read more
A GE range on Perry Drive NW in Massillon was turning on but not reaching proper temperature, with inconsistent baking and occasional shutdowns. Our diagnosis revealed a weak igniter that wasn’t drawing enough current to properly open the gas valve. The Problem The customer reported that their oven turns on but does not reach or … Read more
We received a service call on Perry Drive NW in Massillon for a Jenn-Air range that needed to be checked out. The customer wasn’t sure what the specific issue was, so we performed a complete diagnostic to identify any problems. The Problem The customer contacted us because they weren’t sure what was wrong with their … Read more
A Louisville homeowner called about their Kenmore range that wouldn’t heat to the set temperature. The oven not heating properly turned out to be a failed bake element that needed replacement. The Problem The customer reported that their oven was not heating properly and wouldn’t heat to the set temperature. This is a common issue … Read more
A customer on Center Street in Hartville called about a stove with a heating element fire due to poor cleaning. Our technician found the bake element had failed and needed replacement. The Problem The customer reported a heating element fire due to poor cleaning on their GE range. This type of failure often occurs when … Read more
We received a call about a gas smell coming from a Frigidaire range on Murray Avenue in Minerva, OH. The customer reported a gas leak from their oven. Our inspection revealed the problem wasn’t with the appliance itself, but with the gas line connection. The Problem The customer noticed a gas smell coming from their … Read more