A Samsung dishwasher on Adalaide Avenue in Hartville wasn’t draining and showed an LC1 error code. We found broke pieces of plastic blocking the one-way valve downstream from the pump. The Problem The customer reported their Samsung dishwasher not draining. The unit displayed an LC1 error code, which indicates a drainage issue preventing the wash … Read more
A Canton homeowner needed a four prong adaptor for their Samsung dryer and icemaker parts for their Whirlpool refrigerator. The ice maker had failed on the fridge, and the dryer needed proper electrical connection with a four prong plug instead of the existing three prong setup. The Problem The customer reported needing 4 prong adaptors … Read more
A Samsung washer in Minerva wasn’t filling with water, and the customer also noticed the drum seemed loose. After inspection, we found the cold water inlet screen was plugged with water softener resin from a faulty new water softener system. The Problem The customer reported water not going into machine and that the drum seems … Read more
A Samsung washer on East Line Street in Minerva, OH wouldn’t spin out. The customer called for service when their laundry stayed soaking wet after every cycle. We found worn shock absorbers causing the unit to go out of balance during the spin cycle. The Problem The customer reported their Samsung washer won’t spin out. … Read more
We got a call from Maplegrove Street in Louisville for a Samsung top-load washer that was beeping during cycles and refusing to finish loads. The customer thought maybe the suspension springs were going bad, but when we opened it up, the problem was sitting right at the water supply — completely clogged inlet screens. The … Read more
The washer stopped working mid-cycle, failing to spin or drain. A sock was found stuck in the drain pump, which was replaced.
The dryer was making a loud noise and eventually stopped working. We replaced the idler pulley and heating element to restore functionality.
The ice maker in this Samsung refrigerator stopped working, but we replaced the ice maker kit to restore functionality.
The dryer was making noise and then wouldn’t start. Replacing the motor and heating element resolved the issue.
The oven was emitting high levels of CO gas due to a splash shield covering the vents, causing incomplete combustion.