Samuel Willhite 
A Dover homeowner had a question about their Thermador vent and called us to take a look. We verified the filters were installed properly and confirmed the unit does vent to outside. The Problem The customer had a question about their vent and wanted professional verification that everything was working correctly. Diagnosis We verified filters … Read more
A customer in North Canton called about their front-load GE washer not draining properly. The filter had been checked and seemed fine with no error codes showing, but the pump could be heard trying to run. Our diagnosis revealed a failed drain pump that needed replacement. The Problem The customer reported their front-load GE washer … Read more
We received a service call from East Canton for a Bosch dishwasher that interrupted wash cycle when it would not drain. After the customer cleaned the filter, it drained and finished the run but now makes a noise when washing or rinsing. The Problem Dishwasher interrupted wash cycle when it would not drain. I cleaned … Read more
A GE range on Merrimack Ave NE in Hartville wasn’t heating properly on the front right burner, and the hot surface indicator light stayed on constantly. Our diagnosis revealed the front right hand burner probe was shorted, requiring a complete burner element replacement. The Problem The customer reported that the hot surface indicator light stays … Read more
The dishwasher wouldn’t drain, so we replaced the drain pump to restore functionality.
The refrigerator was not maintaining proper temperature, the ice maker was inoperative, and frost was accumulating in the freezer. Replacing the ice maker wire harness and thermostat resolved the issues.
The dishwasher was leaking due to a damaged drain hose. A new hose and clamp were installed to resolve the issue.
Water was leaking from underneath the washer, caused by faulty inlet valves. Both were replaced to resolve the issue.
The washer beeped three times and wouldn’t start, requiring a control board and heating element replacement.
The washer was overfilling and not discharging water properly. After fixing the pressure hose, it now fills, drains, and spins correctly.