Admiral Dishwasher Repair (Model FFBD2411NW4A) – Massillon, OH
The dishwasher stopped working with no power or lights. A reset of the control board restored functionality.
The dishwasher stopped working with no power or lights. A reset of the control board restored functionality.
The washer didn’t turn on after being moved, but it was a simple fix related to the outlet. It now fills and agitates properly.
The dryer was spinning but not heating. Replacing the heater element resolved the issue, and the idler pulley was cleaned for optimal performance.
The Kenmore Dryer wouldn’t run due to a failed thermal fuse. After replacement, it operated correctly.
The dryer squealed at startup and thumped at shutdown, accompanied by a burnt smell. Replacing the bearings and blower fan resolved the issues.
The dryer was not heating due to failed coil packs on the gas valve. After replacing the coil packs and cleaning the ducting, it is now functioning properly.
We responded to a refrigerator service call in Louisville, OH where the customer reported an SY EF error code with evaporator fan motor failure — both the freezer and refrigerator sides were at room temperature. What we found was ice formation blocking the fan, but not from a failed motor. The Problem The customer’s Admiral … Read more
A customer in Dalton called with a Frigidaire refrigerator that wasn’t keeping the main compartment cold. They’d previously thawed frozen coils, but the cooling problem returned. Our diagnosis revealed a system reset was needed, with a main power control board standing by as backup. The Problem The main compartment doesn’t stay cold. It happens before … Read more
A Whirlpool oven in Malvern, OH recently had an issue where it overheated while at a medium set point, then wouldn’t achieve the temperature set point of 350 degrees. Our diagnosis revealed the main control board had failed, causing the erratic heating behavior. The Problem The customer reported their oven recently overheated while at a … Read more
A Maytag washer in Canton, OH was displaying a SUD error and would not drain. Our technician found the drain pump had failed and needed replacement. The Problem The customer reported their Maytag washer was showing a SUD error and would not drain. This prevented the wash cycle from completing properly. Diagnosis Upon inspection, we … Read more