Whirlpool Washer Repair (Model WFW70HEBW0) – Uniontown, OH
Whirlpool washer WFW70HEBW0 was taking too long to finish. Cleared a clean-cycle error and secured a loose pressure hose rubbing the rotor to restore normal cycles.
Whirlpool washer WFW70HEBW0 was taking too long to finish. Cleared a clean-cycle error and secured a loose pressure hose rubbing the rotor to restore normal cycles.
The large burner on this GE range was heating poorly. Testing found the burner thermostat open; replacing the burner restored full, even heat.
Washer went out of balance during spin. We found weak shocks and a worn drive hub; recommended shock kit and hub replacement, but customer chose a new unit.
The dryer developed loud tumbling noises from a frayed belt, worn idler/rollers, and a rock in the glides. Replacing those parts and clearing debris restored quiet operation.
A Whirlpool dishwasher filled but never washed. Diagnosis confirmed a failed circulation pump; replacing the wash pump restores normal cleaning.
The stove would not power up or feed pellets due to a failed control potentiometer interface. We installed a new control board and cleared an auger jam, restoring normal operation.
Broiler appeared inoperative. Verified normal operation and showed correct broil settings; no parts needed.
Plugged into 220V, this refrigerator would not power on. Diagnosis found a fried inverter board; advised inverter board replacement under warranty.
Washer lid would not lock and water dripped into the tub when off. Replaced a failed lid switch and a faulty water inlet valve to restore normal use.
Dryer powered on but wouldn’t start. A failed door switch was replaced to restore operation.