Samuel Willhite A GE washer in Carrollton wasn’t filling with water and cycles weren’t completing. The customer had already cleaned the hose filters with no improvement. We found the issue was a clogged drain filter that was preventing proper operation. The Problem Water not filling. Cycles not completing. The customer had already cleaned hose filters with no … Read more
A customer on Roxbury Ave NW in Massillon called about their Admiral gas range — the oven don’t work on gas stove. We diagnosed a failed ignitor that wasn’t lighting the oven burner, leaving customers without a working oven. The Problem The customer reported that the oven don’t work on gas stove. The range’s cooktop … Read more
We received a call from a customer in Massillon whose Admiral oven would not fire. After diagnosing the issue, we found the oven ignitor had failed and needed replacement. The Problem The customer reported that their oven would not fire. The unit wasn’t igniting or heating when turned on. Diagnosis Our inspection revealed the oven … Read more
A Whirlpool refrigerator in Malvern, OH was leaking water from the ice-maker. The old ice-maker finish was coming off, which caused water to wick over the edge of the ice-maker. The Problem The customer reported that the refrigerator ice-maker is leaking water. Water was escaping from the ice-maker compartment, creating a mess inside the freezer. … Read more
A Whirlpool gas dryer in Canton, OH was spinning but producing no heat. Our technician found failed gas valve coil packs that needed replacement to restore proper heating operation. The Problem The customer reported their gas dryer was spinning but not heating. The drum would tumble clothes normally, but no heat was being generated during … Read more
A Canton homeowner called about their Admiral refrigerator not cooling well. Our diagnostic revealed dirty condenser coils were blocking proper heat transfer, a common issue that can severely impact cooling performance. The Problem The customer reported their refrigerator was not cooling well. This symptom typically indicates reduced efficiency in the cooling system, which can stem … Read more
A Frigidaire refrigerator in Malvern, OH wouldn’t stay cold consistently — it would work for days and then quit cooling entirely. Our diagnosis revealed a failed control board that was causing the refrigerator to operate sporadically. The Problem The customer reported that their refrigerator won’t stay cold, it stayed cold for about 3 days and … Read more
A customer in Atwater called about their Whirlpool washer and dryer set having multiple issues. The washer wasn’t draining and showed an error code even after reset, while the dryer was squealing during operation. Our diagnosis revealed failed components in both units that needed immediate replacement. The Problem The washer not draining and has error … Read more
A Maytag dryer in Salem, OH stopped heating mid-day after successfully drying one load that morning. The unit was still spinning normally, but no heat was being produced. Our diagnosis revealed a failed heating element that needed replacement. The Problem The customer reported their dryer not heating. It was spinning normally and had dried the … Read more
A Canton homeowner called Louisville Appliance Repair after a power outage left their GE refrigerator completely dark with no lights on the display or inside and no longer cooling. We discovered that a power surge had damaged the user interface control board, requiring replacement to restore normal operation. The Problem The customer reported that after … Read more