Frigidaire Dryer Repair (Model FEX831FSA) – Minerva, OH
The dryer wouldn’t turn despite heating up. The belt was off but has been reattached and is now functioning properly.
The dryer wouldn’t turn despite heating up. The belt was off but has been reattached and is now functioning properly.
The washer was leaking from the cold water hose near the faucet. Replacing the fill hoses resolved the issue.
The washer was leaking, likely due to a faulty water pump. The issue was resolved by replacing the pump.
The washer was not cycling properly, starting in the final rinse and failing to spin out. Tightening the tub nut resolved the issue.
The dryer ran continuously due to a faulty timer. Replacing the timer resolved the issue.
The refrigerator was leaking water from the bottom, which was resolved by installing a new drain tube and defrosting the freezer.
The dryer was not heating properly, leading to damp clothes after cycles. The heating element assembly and belt idler pulley were replaced to resolve the issue.
The refrigerator’s ice maker was dripping water, causing ice cubes to stick together, while the oven door wouldn’t stay closed. The ice maker was replaced.
The dishwasher was not heating even after the heat element was replaced. The issue was resolved by confirming the heater was functioning properly.
The washing machine was making excessive noise during the spin cycle, indicating a potential bearing issue. New bearings and a seal were installed to resolve the problem.