Whirlpool Washer Repair (Model WTW7040DW0) – Alliance, OH
The washer displayed an F5 lock code followed by E2 and E3 codes, indicating issues with locking and unlocking. The lid lock was replaced to resolve the problem.
The washer displayed an F5 lock code followed by E2 and E3 codes, indicating issues with locking and unlocking. The lid lock was replaced to resolve the problem.
The dryer was making a loud screeching sound, which was fixed by replacing the idler pulley and drum roller kit.
The washer displayed an OE code, indicating a drainage issue. After reconnecting a disconnected wire, the appliance is now functioning properly.
Water was leaking onto the wood floor due to a clogged defrost drain. The issue was resolved by cleaning the drain and replacing the ice maker.
The dryer initially smelled hot and wouldn’t turn on, but later ran with an unusual rubbing sound. Cleaning and inspection were performed.
The dishwasher was leaking water onto the floor and not draining properly. A splash guard was installed to resolve the issue.
The dryer was not drying clothes, but after replacing the cord and terminal block, it is now running and heating properly.
The refrigerator was not functioning properly, and the defrost heater element was replaced to restore its operation.
The dryer was not functioning properly due to a loose belt. Replacing the idler pulley resolved the issue.
The dryer was running but not heating. The heating element was burnt out and replaced, restoring functionality.