On a service call to Lincoln Street East in Canton, OH, Samuel found a Frigidaire refrigerator that had stopped cooling entirely, with the freezer down as well. The defrost timer had failed, taking the whole unit offline. After replacing the timer, the refrigerator was back up and running. The Problem Refrigerator and freezer completely stopped … Read more
A Whirlpool dryer on 2nd St SE in Canton, OH was taking longer than normal to dry clothes, though it was still producing heat. Samuel Willhite visited the home and found a blocked lint duct as the cause. A quick clearing of the obstruction had the dryer running properly again, no parts needed. The Problem … Read more
On a service call to Canton, OH, Samuel diagnosed a Maytag bottom-freezer refrigerator that had stopped cooling entirely the day before. The sealed system had failed, and the customer decided to replace the unit rather than pursue a sealed system repair. The Problem Refrigerator and freezer not cooling properly — went out yesterday, bottom freezer … Read more
On a service call to Canton, OH, Samuel Willhite diagnosed a Whirlpool top-load washer (model WTW5057LW0) that was running sporadically and refusing to complete its cycle. A hair pin lodged in the drain pump was blocking drainage, and no parts were needed to resolve the immediate obstruction. The Problem Sporadic operation. Won’t complete cycle. The … Read more
A Frigidaire refrigerator at a home on Gateway Blvd SE in Canton, OH lost its front panel entirely, leaving the dispenser and controls inoperable and giving the owner a shock in the process. Samuel visited the home, confirmed the user interface was dead, and replaced it. With the repair complete, all buttons are responsive and … Read more
A Frigidaire refrigerator at a home on Gateway Blvd SE in Canton, OH had a front panel that went out completely, leaving the dispenser and controls inoperable and shocking an employee in the process, though the unit continued cooling and freezing without issue. Samuel visited the home and found the user interface dead, confirmed proper … Read more
A Frigidaire refrigerator at a home on Gateway Blvd SE in Canton, OH stopped responding at the front panel, leaving the dispenser and controls completely inoperable and giving the homeowner an unexpected shock in the process. Samuel visited the address and found the user interface dead, though the unit was still cooling and freezing normally. … Read more
A Frigidaire refrigerator at a home on Gateway Blvd SE in Canton, OH recently developed a dead front panel, leaving the dispenser and controls completely inoperable and giving the homeowner a shock in the process. Samuel visited the address and found the user interface had failed, confirmed proper voltage to the component, and replaced the … Read more
A GE washer at a home on Holt St SE in Canton, OH was giving its owner some real trouble, showing an H3 error code on the panel, failing to drain, and leaking water onto the floor. The unit would agitate but would not enter the spin cycle, leaving the tub full of water and … Read more
A GE top-load washer at a home on Holt St SE in Canton, OH was leaving laundry soaked because the spin cycle had stopped working. Samuel visited the address, diagnosed the issue, applied firmware updates, replaced the transmission pulley, motor pulley, and belt, and cleared the stored fault codes. The washer was back in working … Read more