A Salem homeowner called us about their Amana refrigerator having temperature issues — warm fresh food section, frosting in the freezer, and extra cold temperatures in the freezer. Our diagnosis revealed a failed main control board that wasn’t initiating the defrost cycle properly. The Problem The customer reported warm ff, frosting in fr, and extra … Read more
A customer in Navarre called about their Amana washer that wouldn’t fill or rinse. When we opened up the machine, we found the water inlet valve had failed completely, cutting off water flow to the tub. The Problem The customer reported their washer wont fill and wont rinse. The machine would start its cycle but … Read more
A customer in Malvern called about their Amana washer that wouldn’t stop filling with cold water. The cold water continued even when it fills up and only stopped when you turn the water supply off. We found a failed water valve that needed replacement. The Problem The customer reported that cold water continues even when … Read more
The upper sections were warming due to a failed evaporator fan motor that halted airflow. Replacing the fan motor restored even cooling throughout.
This Amana dryer (NGD5100TQ1) had no heat and the timer wouldn’t advance. Replacing a burned thermal fuse restored proper heating and timer operation.
Broken door latch kept this Amana dishwasher in Canton from closing and starting. Replaced the latch assembly and restored normal operation.
Refrigerator was not working. Replaced the defrost thermostat and water valve to restore cooling and water service.
An Amana dryer in Carrollton had loud drum noise from a worn idler pulley and support rollers. Replacing the idler and both rollers restored quiet operation.
A Minerva homeowner called about their Amana washer that kept running water after cycles finished. When we arrived at this Lilac Road address, we discovered a more serious problem than expected. The Problem The customer reported that the water keeps running after the cycle is complete and the machine refills with water after the spin … Read more
A washer repair call in Canton brought us to an Amana NTW4605EW0 that fills but won’t cycle. The control board had failed, displaying a pressure sensor error code consistently. The Problem The customer reported their Amana washer fills but won’t cycle. The machine would take on water normally but wouldn’t advance through the wash cycle. … Read more