Kenmore Refrigerator Repair (Model 795.70333.40) – Canton, OH
Kenmore refrigerator’s ice maker would not produce ice while the water dispenser worked. Replaced the ice maker assembly; unit cycled and filled, restoring ice.
appliance repair
Whirlpool Dryer Repair (Model WED95HEXW0) – Carrollton, OH
A Whirlpool dryer in Carrollton, OH was very noisy due to worn support rollers and an idler pulley. Replacing the rollers, idler, and belt restored quiet operation.
Whirlpool Dryer Repair (Model WGD5521SQ0) – Canton, OH
A failing drive motor caused loud noise and a burnt electrical odor. Replacing the drive motor restored smooth, quiet operation.
LG Oven Repair (Model LWD3010ST) – Massillon, OH
After a self-clean cycle, the upper oven stopped heating while the lower oven still worked. Replacing the failed high-limit thermostat restored normal preheat in about 10 minutes.
GE Refrigerator Repair (Model TBF17DB) – North Canton, OH
The GE refrigerator (TBF17DB) lost cooling due to a failed condenser fan. Replacing the condenser fan restored airflow and proper temperatures.
Maytag Dryer Repair (Model MEDC465HWO) – Minerva, OH
Customer reported a rubber smell from a Maytag dryer in Minerva, OH. Technician inspected and verified proper cycling; no fault found at this time.
KitchenAid Dishwasher Repair (Model KUDC10FXBL1) – North Canton, OH
Dishwasher wasn’t getting sufficient water to the upper spray arm due to a clogged food grinder screen. Clearing the screen restored proper cleaning.
LG Appliance Repair (Model LFX31945ST/02) – North Canton, OH
Cooling was fine but the freezer evaporator fan was noisy. Replaced the fan assembly with an updated heater-equipped unit to prevent icing and restore quiet operation.
Samsung Dryer Repair (Model DV48H7400EW/A2) – Minerva, OH
A Samsung dryer in Minerva, OH produced no heat due to a failed heating element/thermostats. Replacing the heater assembly restored normal drying.
Frigidaire Refrigerator Repair (Model FFHS2611PFEA) – Malvern, OH
The refrigerator’s ice maker stopped producing due to a stripped mechanism mid cycle. We replaced the ice maker assembly to restore ice production.