Maytag Dryer Repair (Model MDG3000AWW) – North Canton, OH
Dryer made a loud squeak at startup due to a worn drum support wheel. Replacing the wheel restored quiet, smooth tumbling.
Dryer made a loud squeak at startup due to a worn drum support wheel. Replacing the wheel restored quiet, smooth tumbling.
Oven would not heat while burners worked. Diagnosed a weak bake igniter and replaced it; the oven now heats and preheats normally.
The dryer was excessively noisy due to worn drum support rollers and a failing idler pulley. Replacing all four rollers and the idler restored quiet operation.
The dryer developed a startup squeak from worn support components. Replacing the idler pulley, drum rollers, and belt restored quiet, reliable operation.
Dryer ran but produced no heat. Replacing a failed timer heat circuit restored proper heating.
Washer was leaking around the motor/transmission area and the dryer knob was missing. We replaced the transmission, motor, tub assembly, and control knob.
Washer door was stuck locked with E2/F3 errors. Repaired broken temperature sensor harness and replaced the drain pump to restore normal operation.
This Whirlpool washer left loads soaking wet due to a stripped drive hub. We replaced the hub and restored spin; a transmission may be needed if it recurs.
The dryer had no heat due to a failed heating element. Replacing the element and a worn idler pulley restored proper heating and operation.
Dryer squeaked and rumbled due to worn support rollers and idler pulley. Installed Whirlpool kit with new rollers, idler, and belt to restore quiet operation.