We completed a dryer installation on West Vine Street in Alliance, OH for a customer who was swapping out their old unit. The job involved installing their new AGA dryer and connecting both the gas line and ventilation system with proper airflow verification. The Problem The customer needed their dryer swapped out and required professional … Read more
Louisville Appliance Repair recently completed a dryer repair call in Canton, OH, where a customer on 33rd Street Northeast reported that clothes required two full cycles to dry and that something sounded like it was tumbling inside the machine. Samuel visited the home and found worn support rollers, a faulty idler pulley, and a heavily … Read more
Louisville Appliance Repair recently completed a service call in Akron, OH, where a GE dryer, model DWSR463EG7WW, was humming but otherwise not working. Samuel visited the home on Furnace Run Drive and found that the dryer motor was stalled. The motor issue was resolved, though the control panel was found to be broken and no … Read more
Samuel visited a customer on North Chapel Street in Louisville, Ohio to service several Whirlpool washers and dryers reporting a range of issues, including a suspected belt problem, a possible door switch fault, a sticking coin mechanism, and intermittent no-heat complaints on two units. After inspecting each appliance on-site, he identified the specific causes, including … Read more
The dryer was not turning on, but after repairing a cracked solder joint on the control board, it now functions properly.
The dryer was not producing heat, causing laundry to remain damp. The heating element was replaced to restore functionality.
The gas dryer was running but not producing heat. Replacing the heating element and door switch resolved the issue.
The dryer was not heating due to a faulty flame sensor, which was replaced to restore functionality.
The homeowner reported that both the washer and dryer were not functioning. The issue was resolved by clearing a sock from the washer’s drain pump.
The dryer was not drying clothes effectively, likely due to a power issue. An electrician was recommended to check the breaker panel.