Amana Dryer Repair (Model LG8219W2) – Massillon, OH
The dryer powered on and ran but failed to heat. Replacing the coil packs on the gas valve resolved the issue.
The dryer powered on and ran but failed to heat. Replacing the coil packs on the gas valve resolved the issue.
The dishwasher wouldn’t run and had flashing lights. Replacing the UI board resolved the issue.
The dryer turned on but failed to start. Replacing the belt, idler, and front bearings resolved the issue.
The dryer motor failed to tumble, but after replacing the belt and idler pulley, it now operates smoothly.
The refrigerator was not cooling properly after a move, likely due to a weak compressor that was overheating.
A ProLine exhaust hood in Massillon wasn’t working at all. The homeowner called Louisville Appliance Repair when their kitchen ventilation system completely failed. We found the control board and user interface had both gone bad. The Problem The customer reported their ProLine PLFW832 exhaust hood doesn’t work. No response from any controls, no fan operation, … Read more
A Frigidaire dishwasher on Rolling Green Avenue in Massillon was leaking out of the door and the seal came loose. Our inspection revealed failed door seals that needed complete replacement to stop the water damage. The Problem The customer reported that it was leaking out of the door and then the seal came loose. Water … Read more
A Samsung oven in Massillon wouldn’t ignite, leaving the homeowner without a working cooking appliance. Our diagnosis revealed a failed hot surface ignitor — a common failure point on gas ovens that prevents the safety valve from opening to release gas for combustion. The Problem The customer reported that their oven will not ignite. This … Read more
A customer in Massillon called about their LG washer that wouldn’t spin out and was showing UE and OE error codes. This turned out to be a common programming issue with LG front load washers that required a control board replacement. The Problem The customer reported that their washer won’t spin out and was displaying … Read more
The dishwasher door opened too far, causing the tray to fall out. Replacing the hinges and door panel fixed the issue.