GE Dishwasher Repair (Model GDT695SMJOES) – North Canton, OH
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
Dryer drum wouldn’t spin. A pencil stuck in the blower was removed, restoring normal operation.
A Whirlpool washer in North Canton wouldn’t start after a prior wet floor. Replacing the failed motor capacitor restored operation; water was from a sump pump backup.
The oven on this Samsung range wouldn’t light while the burners worked. Replacing the bake igniter restored reliable ignition and baking.
LG washer WT7600HWA would not drain. Replacing the failed drain pump restored proper draining and completed cycles.
The Whirlpool dryer would not start. Replacing the thermal fuse restored normal operation.
Washer lost power and would only run briefly after a reset. Replacing the main control board restored stable operation.
A sock lodged in the blower and a collapsed vent hose choked airflow on this Electrolux dryer. Clearing the sock and installing a new vent pipe fixed it.
Range was non-responsive due to a failed control board. Replaced the board and verified normal heating.
The GE refrigerator (TBF17DB) lost cooling due to a failed condenser fan. Replacing the condenser fan restored airflow and proper temperatures.