A customer in North Canton called about their Whirlpool dryer making a loud bang as the drum rotates. When we opened up the WED5800SW0, we found the support rollers under the drum had broken — a common failure point that creates dramatic noise when the drum loses proper support. The Problem The customer reported their … Read more
A North Canton customer called about water leaking onto the floor from underneath their LG washer. When the filter was removed, more water than normal gushed out, leading to concerns about a possible drain line blockage. We found the hot water valve was seeping and needed replacement. The Problem Water was leaking onto the floor … Read more
The washer was making a loud noise during the spin cycle, which was resolved by replacing the bearings.
The dryer wouldn’t start, so we replaced the thermal fuse and heating element, ensuring it runs efficiently again.
The ice maker hose broke due to a faulty water valve, which was replaced to restore proper function.
The dryer drum tumbled fine but produced no heat. Replacing the heating element and thermostats resolved the issue.
The dishwasher was working intermittently due to an electrical issue caused by improper installation. The control board was replaced to resolve the problem.
A small leak at the bottom front of the refrigerator was resolved by cleaning the ice out of the drain inside the freezer.
The dryer wouldn’t start due to a failed high limit thermal fuse. After replacement, it now heats and operates correctly.
Water was leaking into the bottom of the freezer, causing ice buildup and leaks onto the floor. The drain was defrosted and a new drain tube kit was installed.