We responded to a service call in Uniontown for a Whirlpool washer that wasn’t working despite the customer’s attempts to unplug and recalibrate the unit. Our diagnosis revealed the machine was stuck in default drain mode with multiple error codes indicating a failed control board. The Problem The customer reported the washer was not working, … Read more
A GE refrigerator on Inverness Road in Akron wasn’t dispensing water through the filter or making ice. When we opened up the water system, we found no water was getting through the manifold assembly that controls flow to both the filter and ice maker. The Problem The customer reported that their refrigerator’s water filter not … Read more
A customer in Akron reported a possible water leak at the front of their GE washer, with water appearing to come from the door seal and/or door lock area. After inspection, we found the actual source was corrosion from the dispenser drawer, though the customer declined the repair quote at this time. The Problem The … Read more
A GE washer on Lakeside Drive in Akron was completely non-responsive with a lid lock failure and leaking underneath. Our diagnosis revealed multiple component failures, but we were able to get it running again with targeted repairs to the most critical systems. The Problem The customer reported their GE washer was non-responsive with lid lock … Read more
A GE washer on Lakeside Dr in Akron, OH was experiencing leak/squeal and now not starting. Our diagnostic revealed multiple system failures on this less-than-two-year-old appliance requiring extensive repairs. The Problem The customer reported their GE washer had developed a leak/squeal and now not starting. This combination of symptoms typically indicates multiple component failures affecting … Read more
A GE washer on Royal Liverpool Drive in Uniontown, OH stopped mid-cycle while washing a coat, leaving clothes soaking wet and unable to spin. The customer reported a burning or overheated smell and suspected a belt or clutch issue. The Problem The washer stopped mid-cycle while washing a coat, leaving clothes soaking wet. It would … Read more
A customer on Maxfli Drive in Akron called us about their LG refrigerator that was not cooling in freezer. Our diagnosis revealed a potential sealed system issue with heavily plugged compressor coils that we cleaned as the first step. The Problem The customer reported their LG refrigerator was not cooling in freezer. All other functions … Read more
We responded to a service call on Raymond Street Northwest in Uniontown, OH for a Samsung refrigerator where the customer was unable to set freezer temp. After our diagnostic inspection, we found all systems were functioning properly. The Problem The customer reported being unable to set freezer temp on their Samsung RF28T5001SR/AA refrigerator. Diagnosis Our … Read more
A GE refrigerator on Lake Center Street Northwest in Uniontown wasn’t keeping the fresh food section cold and had stopped making ice in the freezer. Our diagnosis revealed a failed fresh food fan that wasn’t circulating air properly. The Problem The customer reported that the fresh food section was warm and there was no ice … Read more
A customer in Uniontown called about their GE range that needed a bake igniter installed. They had already purchased the replacement part and just needed professional installation to get their oven working again. The Problem The customer reported that their GE range needs bake igniter installed. They had diagnosed the issue themselves and obtained the … Read more