We returned to a home on Amherst Avenue Northwest in Massillon to investigate a leak that developed after our previous repair visit. The customer noticed a drip underneath their LG washer but couldn’t locate the source due to the tight installation space. The Problem The customer contacted us about a drip underneath their washer that … Read more
We received a service call for a Kenmore washer at a home in Alliance, OH. The customer reported water coming out of the bottom of the machine. Our diagnosis revealed the transmission needed replacement, but the repair cost led to a different decision. The Problem The customer contacted us about water coming out of bottom … Read more
A Maytag washer in Alliance, OH was experiencing spin cycle failures. When it goes to spin the door locks, unlocks and then errors out. Our diagnosis revealed a failed main control board that would require replacement. The Problem The customer reported that when it goes to spin the door locks, unlocks and then errors out. … Read more
A GE washer in Dellroy was overflowing during cycles, creating a mess and preventing normal operation. When we arrived, we found the pressure switch had become plugged with debris, causing the machine to lose track of water levels and continue filling beyond capacity. The Problem The customer reported their washer was overflowing with water during … Read more
A Maytag washer in Salem, OH was displaying error codes E01 and F09, prompting our service call to 35283 Salem Grange Road. What we found was a failed motor control board, water leaking, and loose bearings — multiple major failures that made replacement the better choice. The Problem The customer reported error codes E01 and … Read more
We responded to a service call in Canton, OH for an Admiral washer that would not go into spin mode. The diagnostic revealed multiple error codes pointing to a failed transmission with bearing failure. The Problem The customer reported their washer would not go into spin mode. The machine was displaying error codes and failing … Read more
A Samsung washer on Monticello Street Northwest in Canton wasn’t filling with water despite the customer checking hoses and cleaning intake valve filters. When we arrived for the scheduled service call, the washer was operating correctly and we could not replicate the reported problem. The Problem The customer reported that the washer would not fill … Read more
A customer in Minerva called about their Amana washer that needed a lid lock. We diagnosed the issue and replaced the faulty lid lock assembly to restore normal operation. The Problem The customer reported that their Amana washer needed a lid lock. The washer wasn’t operating properly due to the malfunctioning lid lock mechanism. Diagnosis … Read more
A Whirlpool Cabrio washer in Akron needed new tub bearings, but when we arrived at the Megglen Avenue location, we discovered the damage was beyond economical repair. The upper bearing was stuck in the tub in such a way that removal would have destroyed the tub itself. The Problem The customer contacted us because their … Read more
We received a service call in Massillon for an LG washer with door seal issues. The customer reported the door seal and probably more problems. Our diagnosis revealed a spring that had come off, which we reattached to restore proper operation. The Problem The customer contacted us about their LG WM3500CW washer, reporting issues with … Read more