A customer in Carrollton called about mice that got into their Whirlpool oven. They wanted to know if the unit could be repaired. Our inspection revealed extensive damage throughout the appliance from rodent activity. The Problem Mice got into the stove and the customer needed it looked at to see if it can be repaired. … Read more
A Canton homeowner called when their Whirlpool Accudry Cabrio dryer wouldn’t spin. What looked like a simple belt issue turned into a complete drum support system failure — the idler pulley had locked up entirely, causing the belt to fall off. The Problem The customer reported their dryer wont spin. When we arrived at the … Read more
A Whirlpool washer in Munroe Falls was reported full of water, but our diagnosis revealed a more complex issue. When we ran the manual diagnostic, the washer made a grinding noise during the spin cycle caused by loose transmission mounting bolts. The Problem The customer called because their washer was full of water. However, when … Read more
We responded to a service call in Canton, OH for a Whirlpool dishwasher that turns on but isn’t filling up with water. The customer expected a major repair, but our diagnosis revealed a much simpler issue with the water supply. The Problem The customer reported that their Whirlpool dishwasher turns on but isn’t filling up … Read more
A customer on Walnut Road Southwest in Massillon called about their Whirlpool dryer that spins but no heat. After testing the heating element, we found it had failed completely and the unit was packed with lint buildup. The Problem The customer reported their dryer spins but no heat. The drum would tumble clothes normally, but … Read more
A Whirlpool washer in Canton was making loud bumping noise when spinning. We diagnosed worn tub support pads and installed new teflon pads to restore quiet operation. The Problem The customer reported their washer making loud bumping noise when spinning. This type of noise typically indicates worn suspension components or tub support issues that develop … Read more
We completed a dryer repair in Massillon for a customer whose Whirlpool dryer wouldn’t start. The dryer will not display the Estimated Time Remaining for a cycle, therefore the dryer will not start. After diagnosis, we found the user interface board had failed and needed professional rebuilding. The Problem The dryer will not display the … Read more
The washer was making a loud noise during the spin cycle, which was resolved by replacing the bearings.
The oven was not heating to the selected temperature, which was resolved by replacing the faulty bake element.
The refrigerator side was failing, causing food loss, but the damper assembly was replaced to restore functionality.