Samsung Washer Repair (Model WA54R7200AW/US) – Alliance, OH
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
The GE washer’s lid lock failed, preventing cycles from starting. Replacing the lid lock assembly restored normal operation.
This LG washer in Uniontown, OH showed an OE error and wouldn’t drain due to a failed drain pump. Replacing the pump restored proper draining and quieter cycles.
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
Kenmore Range/Oven in Minerva, OH would not ignite the oven though the cooktop worked. Replacing the bake burner and igniter assembly restored heat.
Range igniter clicked continuously even with gas off. Replacing the igniter switch wire harness resolved the constant sparking.
The oven wouldn’t ignite or hold temperature. Replacing the bake igniter restored reliable ignition and proper preheat performance.
Dryer drum wouldn’t spin. A pencil stuck in the blower was removed, restoring normal operation.
A Whirlpool washer in North Canton wouldn’t start after a prior wet floor. Replacing the failed motor capacitor restored operation; water was from a sump pump backup.
The oven on this Samsung range wouldn’t light while the burners worked. Replacing the bake igniter restored reliable ignition and baking.