Amana Washer Repair (Model NTW4516FW3) – Beloit, OH
Washer wouldn’t finish cycles due to a clogged cold water inlet screen. Cleaning the screen restored proper fill and the cycle now completes.
Washer wouldn’t finish cycles due to a clogged cold water inlet screen. Cleaning the screen restored proper fill and the cycle now completes.
Freezer and fresh food sections were warming due to a failed defrost heater. Replacing the heater restored normal cooling.
Washer would not drain and showed OE error. A failed drain pump and a control board not sending power were replaced to restore proper draining.
Dryer stopped spinning after earlier work on the heater. A seized idler pulley was replaced, restoring drum rotation and normal operation.
The dryer stopped spinning due to a split drum that locked up. We installed an LG warranty replacement drum, restoring normal operation.
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
In Canton, a Kenmore washer filled but wouldn’t advance or drain due to a failed lid switch. Replacing the lid switch restored normal operation.
The gas oven would not light due to a failed igniter. Replacing the oven igniter restored quick ignition and even heating.
Customer reported inaccurate auto water level. Testing showed normal operation; we cleaned the dryer vent and cabinet to restore safe airflow.
The ice maker was dripping during fill and freezing into a solid block. Replacing the ice maker assembly restored normal ice production.