Whirlpool Dryer Repair (Model WED7600XW0) – Alliance, OH
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.
The cold control thermostat failed, causing intermittent cooling. Replacing the thermostat restored consistent temperature.
Washer made a loud grinding noise during wash. Replaced the shift actuator and hub to eliminate the noise and restore smooth operation.
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
The washer was faulting from oversized loads and a stretched, slipping drive belt. We replaced the belt and advised proper 2/3-full loading.
Alliance homeowner reported a freezer not defrosting. We tested the defrost system; no fault found during the visit and the unit operated normally.
A Magnolia homeowner called about their Whirlpool washer that wouldn’t lock the lid or spin. When our technician arrived at the scheduled appointment, another service company was already there working on the machine. The Problem The customer reported that the lid won’t lock and the washer won’t spin. This combination typically indicates an issue with … Read more
A Canton homeowner called about their LG washer making a grinding sound when trying to go into the spin cycle. We found a water bottle lid stuck in the drain pump — a common but easily fixable problem that was blocking proper drainage. The Problem The customer reported their LG washer was making a grinding … Read more
A customer on Gavers Road in Hanoverton called about their GE refrigerator running too warm in the fresh food section. We diagnosed a failed evaporator fan motor that wasn’t circulating cold air properly throughout the unit. The Problem The customer reported the refrigerator was too warm in the frig section. Food wasn’t staying properly chilled … Read more
Our team responded to a service call on Saint Leger Avenue Northeast in Canton, OH for an LG washer that was tripping the arc fault breaker. After thorough diagnosis, we determined the control board was causing the electrical fault, but replacement parts are no longer available for this model. The Problem The customer reported their … Read more