Samuel Willhite A GE dishwasher on Edmar Street in Louisville wouldn’t start despite resetting the breaker. Our diagnosis revealed a failed UI control board that needed replacement along with new mounting brackets. The Problem The customer reported their dishwasher won’t start. They had already reset the breaker but still nothing happened when they tried to operate the … Read more
We returned to a Samsung dishwasher in Canton, OH that had developed the same leak we’d repaired just a few weeks earlier. The homeowner reported that their dishwasher started leaking again under the front door area after working perfectly since our last visit. The Problem The customer called because their Samsung dishwasher started leaking again … Read more
A Louisville homeowner called about their Kenmore range that wouldn’t heat to the set temperature. The oven not heating properly turned out to be a failed bake element that needed replacement. The Problem The customer reported that their oven was not heating properly and wouldn’t heat to the set temperature. This is a common issue … Read more
We returned to a home on Hayne Road in Akron for a Kenmore refrigerator ice maker that quit making ice again. The customer mentioned we had fixed this same issue last year on October 10th, 2018. After checking our records and inspecting the appliance, we found the water valve had failed once more. The Problem … Read more
A KitchenAid refrigerator on Frazer Avenue NW in Canton was having intermittent ice maker issues. The customer reported their ice maker doesn’t work, but our inspection revealed it was still making ice sporadically. The Problem The customer called because their ice maker doesn’t work. They were experiencing inconsistent ice production from their KitchenAid refrigerator. Diagnosis … Read more
A customer in North Canton called about their Frigidaire stackable washer that stopped mid-cycle with rugs inside. The lid was stuck in the locked position and they couldn’t get the door open or remove the laundry. The Problem The washer stopped during a cycle with rugs inside and the door became locked shut. The customer … Read more
A Canton homeowner called us about their KitchenAid Selectra oven displaying an F3 error code that prevented any oven operation. We also installed their new Samsung dishwasher during the same service call. The oven issue was resolved with a temperature sensor replacement. The Problem The customer reported their KitchenAid Selectra oven was showing an F3 … Read more
A North Canton homeowner contacted us when their Kenmore dishwasher stopped working completely. The “Clean” light was blinking 7 times, pausing, then repeating the sequence — a clear diagnostic code indicating a specific system fault. The Problem The dishwasher stopped working, with the “Clean” light blinking 7 times, pausing and then repeating another 7 blinks. … Read more
A customer in Massillon called about their LG dryer that takes a long time to heat. During our inspection, we discovered the dryer vent was obstructed and the unit had an undersized 3-inch vent instead of the required 4-inch vent. The Problem The customer reported their LG dryer takes a long time to heat. Poor … Read more
A Whirlpool dryer in North Canton stopped spinning but was still getting hot. The customer believed the belt had stopped working. Our diagnosis revealed the idler pulley had failed, causing the belt to come off and break. The Problem The dryer does not spin, but still gets hot. The customer believed the belt on the … Read more