Maytag Dryer Repair (Model MEDC300XW0) – Louisville, OH
Dryer ran hot on all settings due to a heating element shorted to the frame. Replaced the element to restore proper temperature control.
Dryer ran hot on all settings due to a heating element shorted to the frame. Replaced the element to restore proper temperature control.
Dryer would not start. Failed door switch replaced, restoring normal operation.
Intermittent leaking from the dishwasher door was traced to worn seals. Replacing the door gasket and bottom door seal stopped the leaks.
Washer filled and washed but would not drain or spin. A failed lid switch was replaced to restore normal operation.
The dishwasher wouldn’t drain and left debris on dishes. Clearing debris from the drain pump and cleaning the lower spray arm restored proper washing and drainage.
The upper sections were warming due to a failed evaporator fan motor that halted airflow. Replacing the fan motor restored even cooling throughout.
Water was leaking inside the refrigerator compartment. Clearing a clogged freezer defrost drain restored proper drainage and stopped the leak.
Heavy and Smart Auto lights were flashing due to an obstruction in the case brake water level sensor. Clearing the sensor and sump hose restored normal operation.
Washer displayed F5 and kept the lid locked. Replacing the failed lid switch restored normal operation.
The GE washer wasn’t filling and was throwing errors. Cleaning the water inlet screens and the drive belt restored normal operation.