This Estate dryer in Beloit wasn’t running at all when we arrived. The homeowner had tried everything they could think of, but the machine remained completely dead. Our diagnosis revealed failed safety components that had shut down the entire system. The Problem The customer reported their Estate dryer won’t run at all. No matter what … Read more
A Samsung dryer at a home on West High Street in Minerva, OH was powering up but wouldn’t start when we arrived for service. The issue turned out to be a worn idler pulley that needed replacement to restore normal operation. The Problem The customer reported that their Samsung dryer would power up but won’t … Read more
A Whirlpool dryer in Minerva was squealing and not drying as fast as it should. Our diagnosis revealed multiple worn components that were affecting both the noise level and heating performance. The Problem The customer reported that their dryer was squealing and not drying as fast. These symptoms typically point to worn drum support components … Read more
We responded to a commercial laundry facility in Magnolia, OH where a large Dexter washer wouldn’t spin out and several dryers were out of order. What looked like multiple equipment failures turned out to be a mix of maintenance issues and one genuine part failure. The Problem The customer reported that their washer won’t spin … Read more
We responded to a service call in Malvern, OH for an Admiral refrigerator making a loud buzzing noise from the freezer fan. The customer had defrosted the unit a month prior, but the buzzing returned that morning. Our diagnosis revealed ice buildup was causing the fan to hit frozen water, with the root cause being … Read more
A standup freezer in Louisville wasn’t keeping cold because the compressor wouldn’t run. We found the cold control thermostat had failed and replaced it to restore normal operation. The Problem The customer reported that the compressor is not running. Without the compressor cycling on, the freezer couldn’t maintain proper temperatures. Diagnosis We tested the cold … Read more
A Canton homeowner called us when their LG refrigerator’s ice maker stopped working completely. We arrived to find the ice maker assembly had failed and needed replacement. The Problem The customer reported that the ice maker doesn’t work. No ice production, no cycling sounds, no water filling — the unit was completely dead. Diagnosis Testing … Read more
A customer in Kensington called about their Admiral oven that would not always achieve the set temperature and had shut off a couple times with all numbers flashing 8888888. Our diagnosis revealed a failing oven control board that needed replacement. The Problem The oven does not always achieve set temp and has shut off a … Read more
A customer on Pierce Avenue Northwest in North Canton called with a Frigidaire gas oven that wasn’t lighting. After diagnosis, we found the temperature sensor probe had failed, preventing proper oven operation. The Problem The customer reported their oven wasn’t lighting. This is a common issue with gas ovens that can stem from several components … Read more
A KitchenAid dishwasher in Canton, OH was giving its owner control panel headaches. The key pad for the cycles was not appearing to work correctly, making it difficult to cancel cycles and causing continuous beeping even when cycles were supposedly cancelled. Our diagnosis revealed a failed user interface that needed complete replacement. The Problem The … Read more