GE Dishwasher Repair (Model GSD3300K00BB) – Massillon, OH
The dishwasher was not draining, leaving standing water after cycles. Replacing the solenoid and timer resolved the issue.
The dishwasher was not draining, leaving standing water after cycles. Replacing the solenoid and timer resolved the issue.
The washer’s agitator was stagnant and the lid wouldn’t stay up. We installed a new thrust bearing and hinges to restore functionality.
The refrigerator was not cooling below 55 degrees, leading to concerns about whether to repair or replace it. A new door seal was installed to resolve the issue.
The refrigerator was not cooling properly in the fresh food compartment due to frost buildup, likely from a circulation or defrost issue.
The washer was not cycling properly, causing laundry delays. The issue was resolved by cleaning the inlet valve and calibrating the machine.
The refrigerator was leaking water from the left front side, which was resolved by defrosting ice and clearing the drain.
The refrigerator was leaking due to a damaged ice maker cord, which was repaired by fixing the water line.
The dryer drum wasn’t turning despite heat functioning. The issue was resolved by adjusting the tightener bracket.
The washer was beeping continuously and wouldn’t shut off, requiring a breaker reset. A new control board was installed to resolve the issue.
The refrigerator’s control panel lights were off, and it was not running. Replacing the control board resolved the issue.