Samsung Dryer Repair (Model DV42H5000EW/A3) – Alliance, OH
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Washer would not drain or spin and made noise. Replaced failed drain pump to restore proper draining and spin.
We responded to a service call in Alliance, OH for a Maytag washer that was leaking from underneath the machine. Our diagnosis revealed the drain hose on the bottom of the tub had come loose, causing water to escape during operation. The Problem The customer reported their washer was leaking, with water appearing to come … Read more
A customer in Alliance called about their Whirlpool refrigerator that was running but not cooling properly. The fan was running but the refrigerator was warm along with the freezer, acting like it was trying to kick on but just not getting there. We diagnosed a failed evaporator fan motor that needed replacement. The Problem The … Read more
Refrigerator cooled sporadically due to a failing cold control thermostat. Replaced the thermostat and cooling is now consistent.
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.
A Frigidaire Dryer GLEQ2152ES0 in Alliance, OH was shutting down after a few minutes with flashing lights and an ‘Ad’ message. Replacing the heating element assembly, bearing kit, belt, and idler pulley restored normal operation.
The front-left burner stopped heating due to a corroded wire lead. We installed a new element and repaired the connection.
This Whirlpool dryer in Alliance wasn’t heating even though it ran. Replacing a blown high-limit fuse, cycling thermostat, and warped heater restored heat.
The dryer had no heat due to a failed heating element. Installing a new element restored proper cycling and heat.