Frigidaire Oven Repair (Model FGEF3055KFB) – Canton, OH
The oven was not reaching the temperature setting, but after replacing the control panel, it now operates normally.
The oven was not reaching the temperature setting, but after replacing the control panel, it now operates normally.
The electric oven failed to preheat due to a faulty bake element, which was replaced to restore functionality.
The bottom oven wouldn’t heat, and the top was intermittent. Replacing the ignitors resolved the issue.
A Kenmore washer in Canton, OH stopped spinning during its cycle. The spin cycle stopped, leaving clothes soaking wet. Our diagnosis revealed a motor failure that made replacement the better option. The Problem The customer reported that the spin cycle stopped working on their Kenmore washer. The machine would fill and agitate normally but wouldn’t … Read more
We responded to a service call in Canton, OH for an LG washer that was powering on but the control panel would go blank and power off when choosing a cycle. The customer had already contacted LG support who walked them through a reset, but the washer lost power again mid-cycle with the same repeat … Read more
The washer was leaking more than usual, and the dryer displayed a d80 error code. We replaced the drain hose and referred the customer for vent cleaning.
The dryer was making noise due to a failed idler pulley, which was replaced to restore normal operation.
The washer wouldn’t drain, causing water to remain in the tub. A failed transmission was replaced to restore functionality.
The dryer required the start button to be held down to run, which was fixed by correcting the wiring and replacing the front bearing kit.
The dryer was not getting hot during operation, which was resolved by installing a new heating element assembly.