KitchenAid Dishwasher Repair (Model KUDK03CTSS3) – Louisville, OH
Intermittent leaking from the dishwasher door was traced to worn seals. Replacing the door gasket and bottom door seal stopped the leaks.
Intermittent leaking from the dishwasher door was traced to worn seals. Replacing the door gasket and bottom door seal stopped the leaks.
Water was leaking inside the refrigerator compartment. Clearing a clogged freezer defrost drain restored proper drainage and stopped the leak.
The refrigerator was cycling sporadically and icing up due to a leaking water inlet valve. We replaced the valve and defrosted the freezer and drain to restore cooling.
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
A Whirlpool washer in North Canton wouldn’t start after a prior wet floor. Replacing the failed motor capacitor restored operation; water was from a sump pump backup.
Washer was leaking around the motor/transmission area and the dryer knob was missing. We replaced the transmission, motor, tub assembly, and control knob.
The Whirlpool dryer was set up for natural gas while the home uses propane. We installed an LP conversion kit and calibrated burner settings for safe, efficient heat.
The refrigerator’s water line was leaking. We cut out the damaged section and spliced new tubing to stop the leak.
A Whirlpool dishwasher filled but never washed. Diagnosis confirmed a failed circulation pump; replacing the wash pump restores normal cleaning.
LG washer in Canton showed an OE drain error and wouldn’t rinse due to a failed drain pump. Replaced the pump; washer now drains and completes cycles.