Frigidaire Dishwasher Repair (Model LFBD2409LF3C) – Louisville, OH
Dishwasher wouldn’t drain after a cycle due to glass obstructing the drain hose. Clearing the hose restored normal draining.
Dishwasher wouldn’t drain after a cycle due to glass obstructing the drain hose. Clearing the hose restored normal draining.
Washer showed F20 due to a failed inlet flow meter that couldn’t confirm water supply. Replaced the flow meter sensor and restored normal operation.
The dishwasher wouldn’t drain and left debris on dishes. Clearing debris from the drain pump and cleaning the lower spray arm restored proper washing and drainage.
The upper sections were warming due to a failed evaporator fan motor that halted airflow. Replacing the fan motor restored even cooling throughout.
Heavy and Smart Auto lights were flashing due to an obstruction in the case brake water level sensor. Clearing the sensor and sump hose restored normal operation.
Washer displayed F5 and kept the lid locked. Replacing the failed lid switch restored normal operation.
The GE washer wasn’t filling and was throwing errors. Cleaning the water inlet screens and the drive belt restored normal operation.
Dryer wouldn’t start and later struggled with full loads due to a misinstalled idler pulley. We fitted the OEM pulley correctly and restored normal operation.
Refrigerator cooled sporadically due to a failing cold control thermostat. Replaced the thermostat and cooling is now consistent.
The Samsung dishwasher showed flashing Heavy and Smart Auto lights due to a blockage in the case brake water level sensor assembly. Clearing the case brake and sump hose restored normal operation.