GE Refrigerator Repair (Model GSE26GGEBCWW) – Alliance, OH
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
The ice maker was dripping during fill and freezing into a solid block. Replacing the ice maker assembly restored normal ice production.
Kenmore refrigerator showed ER RF error and clicking due to a failed evaporator fan. Replacing the evaporator fan and cover assembly restored cooling.
Refrigerator was running but not cooling in either compartment. Fault traced to a failed inverter board; replacement restored compressor operation and cooling.
The refrigerator stopped making ice due to a non-cycling ice maker. Replacing the ice maker restored normal ice production.
The start relay failed, so the compressor wouldn’t start. Replacing the relay restored proper cooling and temperature control.
The refrigerator’s water line was leaking. We cut out the damaged section and spliced new tubing to stop the leak.
Plugged into 220V, this refrigerator would not power on. Diagnosis found a fried inverter board; advised inverter board replacement under warranty.
The ice maker froze cubes but failed to eject, leaving water in the bin. Replacing the ice maker restored normal ice production.
The refrigerator wasn’t cooling or running. A failed cold control was found and replaced, restoring cooling; allow up to 24 hours to stabilize.