Whirlpool Dishwasher Repair (Model WDT970SAHV0) – Alliance, OH
The Whirlpool dishwasher was not cleaning due to a clogged middle spray arm. We cleared the blockage and restored proper spray and wash performance.
Samuel Willhite
GE Washer Repair (Model GUD27GSSM1WW) – Alliance, OH
The washer was faulting from oversized loads and a stretched, slipping drive belt. We replaced the belt and advised proper 2/3-full loading.
Whirlpool Refrigerator Repair (Model GD5RVAXVB02) – Alliance, OH
Alliance homeowner reported a freezer not defrosting. We tested the defrost system; no fault found during the visit and the unit operated normally.
Insinkerator Disposal Repair (Model BADGER 5 PLUS 5 PLUS-5) – Alliance, OH
Disposal wouldn’t turn on and the sink was backing up. Cleared a jam and reset the unit, restoring normal grinding and drainage.
Maytag Dryer Repair (Model MEDC300BW0) – Alliance, OH
The dryer made loud squeaks and squeals at startup. Worn drum rollers and a rough idler pulley were replaced, eliminating the noise; heater checked OK.
Samsung Dryer Repair (Model DV42H5000EW) – Alliance, OH
Dryer had no heat. Replaced the heating element assembly (element, thermal fuse, cycling thermostat) and a worn idler pulley to restore proper drying.
Amana Dryer Repair (Model NGD5100TQ1) – Alliance, OH
This Amana dryer (NGD5100TQ1) had no heat and the timer wouldn’t advance. Replacing a burned thermal fuse restored proper heating and timer operation.
Admiral Refrigerator Repair (Model LGHS2665KF2) – Alliance, OH
The refrigerator was cycling sporadically and icing up due to a leaking water inlet valve. We replaced the valve and defrosted the freezer and drain to restore cooling.
Maytag Washer Repair (Model MVWC565FW0) – Alliance, OH
Agitator wasn’t moving and the basket wouldn’t engage. Replacing the wash plate and spin hub restored proper agitation and spin.
Samsung Refrigerator Repair (Model RF28HFEDTWW/AA) – Alliance, OH
The refrigerator section stopped cooling while the freezer worked. Replaced the fridge evaporator cover (with new fan and sensor), cleared and updated the defrost drain and heat probe.