Samuel Willhite A Canton homeowner called about their 2-year-old Amana dryer that would turn on but produce no heat. They had already checked the ductwork and found it clear, but the unit still wouldn’t dry clothes. Our diagnosis revealed a failed heating element that needed replacement. The Problem The customer reported that their dryer turns on but … Read more
A Frigidaire dishwasher on Lynch Street SW in Massillon was leaking water again after a recent repair. The customer called us back for what turned out to be a loose turbidity sensor at the bottom of the sump. The Problem The customer reported that their dishwasher was leaking water again. This was a follow-up call … Read more
A Whirlpool washer in Homeworth developed a locked lid that wouldn’t unlock. Our diagnosis revealed significant damage to the control board that made repair impractical for this older unit. The Problem The customer reported that the lid is locked and won’t unlock. This prevented normal operation of the washer, leaving laundry stranded inside the machine. … Read more
A Samsung dryer in Canton, Ohio was shutting off mid cycle despite having the heating element replaced six months earlier. Our diagnosis revealed a failed high limit thermal fuse that needed replacement to restore normal operation. The Problem The customer reported that their Samsung dryer shuts off mid cycle. They mentioned the heating element had … Read more
A Samsung oven on Avalon Street Northwest in Canton, OH had wires that caught fire. We replaced the damaged wire harness and valve assembly to restore safe operation. The Problem The customer reported that wires caught fire in their Samsung oven. This created a dangerous situation requiring immediate attention and repair. Diagnosis Upon inspection, we … Read more
A GE washer in Sebring wouldn’t spin and had water dripping. Our diagnosis revealed a failed water valve assembly that needed replacement to restore normal operation. The Problem The customer reported their GE washer won’t spin and water drips. These symptoms typically indicate an issue with the water control system preventing proper cycle completion. Diagnosis … Read more
A Dover homeowner called about their Whirlpool washer making noise while operating. Our diagnosis revealed the bearings were going bad in the washer — a common failure point that creates grinding or rumbling sounds during the wash cycle. The Problem The customer reported their Whirlpool front-load washer was making noise while operating. This type of … Read more
The dryer was spinning but not heating. Replacing the heat element resolved the issue.
The heated dry cycle was not functioning, leaving soap suds and a white film on dishes. Replacing the flood switch resolved the issue.
The refrigerator was not cooling due to a faulty defrost thermostat, which was replaced to restore functionality.