Samuel Willhite A Samsung refrigerator in Waynesburg wasn’t starting its compressor, with a blinking LED on the PCB indicating either inverter or compressor failure. After diagnosing the unit, we found the compressor had failed with a short in the windings and error code 81E. The Problem The customer reported that the compressor won’t start and there’s a … Read more
We received a service call in North Canton for an LG washer that would not turn the drum. This WM2501HWA required two visits to fully resolve the issue, starting with a clogged drain pump filter and ending with a faulty hot water valve replacement. The Problem The customer reported that their LG washer will not … Read more
We received a service call for a Maytag dishwasher in Canton, OH where nothing happens when trying to start, though the light comes on. Our diagnosis revealed blown thermal fuse and swollen capacitors on the main control board, along with nonresponsive start and cancel buttons that required a new user interface. The Problem The customer … Read more
We responded to a refrigerator service call in Homeworth, OH where the customer reported their Admiral unit was clicking and humming. After diagnosing the issue, we found the windings on the compressor are weak, indicating the compressor is failing. The Problem The customer called because their refrigerator was clicking and humming. These sounds typically indicate … Read more
A Samsung oven in Rootstown, OH had two distinct problems affecting daily kitchen use. The homeowner reported that the lights on the hood went out and the latch on the dual door wasn’t allowing them to open the entire oven door, though they could still open the top portion when pushing the button. The Problem … Read more
Kenmore Range/Oven in Minerva, OH would not ignite the oven though the cooktop worked. Replacing the bake burner and igniter assembly restored heat.
Range igniter clicked continuously even with gas off. Replacing the igniter switch wire harness resolved the constant sparking.
The oven wouldn’t ignite or hold temperature. Replacing the bake igniter restored reliable ignition and proper preheat performance.
Dryer drum wouldn’t spin. A pencil stuck in the blower was removed, restoring normal operation.
A Frigidaire dishwasher in Massillon was turning on but wouldn’t complete a cycle. The unit was displaying an i20 error code, which led us to discover a faulty water pressure sensor that required replacement following Frigidaire’s service bulletin. The Problem The customer reported that their dishwasher turns on but will not complete a cycle. The … Read more