We returned to a Samsung dishwasher in Canton, OH that had developed the same leak we’d repaired just a few weeks earlier. The homeowner reported that their dishwasher started leaking again under the front door area after working perfectly since our last visit. The Problem The customer called because their Samsung dishwasher started leaking again … Read more
A Samsung dryer on Danielle Avenue in Louisville was working but making clicking squeaking sound. The customer had kept the original papers for the unit. Our diagnosis revealed a worn idler pulley causing the noise. The Problem The customer reported that the dryer works but making clicking squeaking sound. They mentioned having the original papers … Read more
A Samsung washer on Clarendon Ave NW in Canton, OH was displaying a 4c error code and not spinning out. We diagnosed a failed water valve and replaced it to restore normal operation. The Problem The customer reported their Samsung washer was showing a 4c error code and not spinning out properly during the wash … Read more
A Samsung dishwasher in Atwater started showing 2 flashing blue lights and wouldn’t dry dishes properly. The customer had already tried turning the power off and back on, but the blue lights kept returning after the cycle ran. The Problem The Samsung DW80N3030US had 2 flashing blue lights and won’t dry the dishes. The customer … Read more
Dryer ran and heated but made belt-slip noise. Failed idler pulley replaced and tested; unit operates quietly and normally.
A Samsung refrigerator in Massillon was freezing up and the ice maker stopped working. The customer had unplugged it, which worked for a little while, but it started freezing up again. We found multiple issues causing the problems and completed repairs over two service visits. The Problem The customer reported their fridge was freezing up … Read more
The heating element failed. Replaced the heater assembly (with high-limit and cycling thermostats) and serviced the rollers, restoring proper heat and cycling.
Dryer ran continuously after cycles due to a stuck relay on the control board. Replaced the control board and door switch to restore proper shutoff.
We responded to a service call in East Canton for a Samsung dryer that wouldn’t operate. The customer reported their dryer was completely dead, but our diagnosis revealed the unit had overheated due to a lint-covered thermistor, which caused the thermal fuse to blow. The Problem The customer’s Samsung DV350AEW/XAA dryer won’t operate. The unit … Read more
A Samsung dryer at a home on West High Street in Minerva, OH was powering up but wouldn’t start when we arrived for service. The issue turned out to be a worn idler pulley that needed replacement to restore normal operation. The Problem The customer reported that their Samsung dryer would power up but won’t … Read more