Samsung Washer Repair (Model WA54R7200AW/US) – Alliance, OH
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
The front dispenser and controls were unresponsive due to a failed main control board. Replacing the board restored normal dispensing and cooling.
A Whirlpool dishwasher in Alliance wasn’t draining, and the homeowner had already tried shutting off the electric for 15-20 minutes without success. Our diagnosis revealed a failed drain pump that needed replacement along with cleaning out the drain line. The Problem The customer reported their Whirlpool dishwasher won’t drain. They had already tried shutting off … Read more
A Samsung dryer on E 12th Street in Alliance started making a loud screeching sound when turning it on. We found a worn idler pulley that needed replacement, along with support rollers that required cleaning and lubrication. The Problem Saturday, it started making a loud screeching sound when turning it on. The customer contacted us … Read more
We got a call from Alliance about a Maytag dryer that runs but won’t spin. The drum wasn’t turning at all even though the motor was running. After removing the front panel, we found the drive belt had snapped completely. The Problem The customer reported their dryer runs but won’t spin. The motor would start … Read more
A customer in Alliance called about their Whirlpool washer showing an error code for the door and refusing to start on any setting. After using the manual release to retrieve their laundry, the machine remained completely unresponsive. We found a simple but critical alignment issue that had disabled the entire wash cycle. The Problem The … Read more
Oven was dead due to a failed clock/control board. Replaced the control panel/board and restored normal operation.
A GE dryer on Parkside Drive in Alliance, OH wouldn’t turn on at all despite the homeowner checking the breaker. We found the drum drive belt had snapped completely, preventing the unit from operating. The Problem The customer reported their dryer won’t turn on at all. They had already checked the breaker to rule out … Read more
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
A customer in Alliance called about their Admiral washer that would lock when turned on but go straight to pause. The door didn’t seem to latch well, and they had recently replaced the plastic latch. We found the door latch lock assembly had failed — a common issue with these machines. The Problem The washer … Read more