Maytag Washer Repair (Model MVWC565FW0) – Alliance, OH
Agitator wasn’t moving and the basket wouldn’t engage. Replacing the wash plate and spin hub restored proper agitation and spin.
Agitator wasn’t moving and the basket wouldn’t engage. Replacing the wash plate and spin hub restored proper agitation and spin.
The refrigerator section stopped cooling while the freezer worked. Replaced the fridge evaporator cover (with new fan and sensor), cleared and updated the defrost drain and heat probe.
Washer was stuck in drain and couldn’t change cycles. Replacing the pressure switch and running calibration restored normal operation.
The GE washer’s lid lock failed, preventing cycles from starting. Replacing the lid lock assembly restored normal operation.
This LG washer in Uniontown, OH showed an OE error and wouldn’t drain due to a failed drain pump. Replacing the pump restored proper draining and quieter cycles.
The GE dishwasher wouldn’t start and the lock light flashed. A tripped CSM safety module was reset and the filter, float sensor, and sump were cleaned.
Kenmore Range/Oven in Minerva, OH would not ignite the oven though the cooktop worked. Replacing the bake burner and igniter assembly restored heat.
Range igniter clicked continuously even with gas off. Replacing the igniter switch wire harness resolved the constant sparking.
The oven wouldn’t ignite or hold temperature. Replacing the bake igniter restored reliable ignition and proper preheat performance.
Dryer drum wouldn’t spin. A pencil stuck in the blower was removed, restoring normal operation.