KitchenAid Dishwasher Repair (Model KUDK03ITBL0) – Canton, OH
The top shelf of the dishwasher was not receiving water, which was resolved by clearing a plugged pump intake and running a clean cycle.
The top shelf of the dishwasher was not receiving water, which was resolved by clearing a plugged pump intake and running a clean cycle.
The washer failed to fill with water due to a drain hose issue and an inlet thermistor error. Both problems were resolved during the repair.
The ice dispenser was clogged with ice and frost, preventing it from dispensing ice. The issue was resolved by clearing the blockage.
The refrigerator was not cooling properly, with an inside temperature reading of 59 degrees. The evaporator fan was replaced to restore functionality.
The refrigerator was not cooling while the freezer was functioning. Replacing the evaporator fan motor resolved the issue.
The washer stopped working mid-cycle and wouldn’t spin or drain. A sock was found stuck in the drain pump, which burnt it out and required replacement.
The refrigerator side was failing, causing food loss, but the damper assembly was replaced to restore functionality.
The oven was not heating to the selected temperature. Replacing the bake element resolved the issue.
The dryer turned on and tumbled but produced no heat. Replacing the heating element resolved the issue.
The oven was not heating properly, but after replacing the main control board, it is now functioning correctly.