A Canton homeowner called about their LG refrigerator with the freezer getting to temp but refrigerator section not cooling. Our diagnosis revealed blocked airflow pathways preventing proper circulation between compartments. The Problem The customer reported their top/bottom freezer refrigerator had a freezer getting to temp but refrigerator section not cooling. This is a classic airflow … Read more
A Kenmore dryer at a Canton home wasn’t producing any heat, leading the homeowner to suspect a failed heating element. When we arrived at the Hoover Place Northwest address, our diagnosis revealed the actual culprit was a failed thermostat system. The Problem The customer reported no heat and suspected the heating element was shot. The … Read more
A Whirlpool washer in Canton was making loud bumping noise when spinning. We diagnosed worn tub support pads and installed new teflon pads to restore quiet operation. The Problem The customer reported their washer making loud bumping noise when spinning. This type of noise typically indicates worn suspension components or tub support issues that develop … Read more
We responded to a service call in Canton, OH for a Maytag dryer that would turn on and make noise but the drum wouldn’t turn. After diagnosing the unit, we found the motor had failed and the lint screen was shot, leading the customer to decline repair due to parts cost. The Problem The customer … Read more
The washer stopped working mid-cycle, failing to spin or drain. A sock was found stuck in the drain pump, which was replaced.
The washer wouldn’t complete its cycle due to a locked drain pump. Replacing the drain pump and drive belt resolved the issue.
The oven was not heating to the selected temperature, which was resolved by replacing the faulty bake element.
The refrigerator was leaking from the bottom, which was resolved by cleaning out the ice and dirt from the drain hose.
The refrigerator side was failing, causing food loss, but the damper assembly was replaced to restore functionality.
The refrigerator was not cooling while the freezer was functioning. The evaporator fan motor was replaced to resolve the issue.