Samsung Dryer Repair (Model DV42H5200EP/A3) – Canton, OH
The dryer had no heat due to a failed heating element. Replacing the element and a worn idler pulley restored proper heating and operation.
The dryer had no heat due to a failed heating element. Replacing the element and a worn idler pulley restored proper heating and operation.
A Samsung refrigerator in Canton, OH started climbing in temperature yesterday afternoon, reaching 54 degrees with freezer food beginning to thaw. After trying all the quick fixes, the homeowner called for professional refrigerator repair. We found a communication cable partially unplugged on the control board. The Problem Yesterday afternoon, the temp in the refrigerator started … Read more
We returned to Massage Envy in Canton, OH for a follow-up repair on their LG washer that was not draining. Our initial inspection revealed multiple issues — a cracked soap dispenser housing was leaking water onto the drain pump, causing it to fail. The Problem The customer reported the same issue as the previous week … Read more
Poor cooling traced to a dislodged evaporator fan blade, and no water due to a failed tank assembly. Replaced the fan blade and water tank to restore both.
A power outage from a downed telephone pole in Canton left multiple appliances malfunctioning at this State Street Northeast home. The GE range had all burners stuck on high heat regardless of the temperature setting, while the microwave was completely dead. The Problem After a telephone pole went down outside the house and took the … Read more
Freezer and fresh food sections were warming due to a failed defrost heater. Replacing the heater restored normal cooling.
We responded to a service call on Channel Drive in Canton, Ohio for a Samsung refrigerator that needed new ice maker installed. Our diagnostic revealed this refrigerator had the faulty icemaker and control board scenario covered under Samsung’s service bulletin, requiring the complete icemaker service kit for proper repair. The Problem The customer reported they … Read more
In Canton, a Kenmore washer filled but wouldn’t advance or drain due to a failed lid switch. Replacing the lid switch restored normal operation.
The gas oven would not light due to a failed igniter. Replacing the oven igniter restored quick ignition and even heating.
Customer reported inaccurate auto water level. Testing showed normal operation; we cleaned the dryer vent and cabinet to restore safe airflow.