A customer in Canton called about their Whirlpool washer leaving clothes still wet after the spin cycle, though some settings were still working. Our diagnosis revealed a plugged cold water screen that was preventing the machine from completing its final rinse cycle. The Problem The customer reported that clothes were still wet after the spin … Read more
A Whirlpool washer in Canal Fulton was showing a PF error and the door would lock on start but wouldn’t reopen. After checking everything over, we determined the unit appeared okay and recommended having an electrician address potential breaker issues. The Problem The customer reported that their Whirlpool washer door locks on start and won’t … Read more
A Whirlpool washer in North Canton was making grinding noises and wouldn’t finish its cycle. When we opened it up, we found the transmission bearings were completely shot and oil was leaking everywhere underneath. The Problem The customer reported their washer makes grinding noises and doesn’t seem to finish the cycle. These symptoms pointed to … Read more
A Whirlpool washer at Edison Street NE in Alliance wasn’t draining properly after another repair company had already replaced the water valve. Our diagnosis revealed the real problem: a failing drain pump that was humming but not moving water. The Problem The customer reported that their wash machine will not work. Another repairman came out … Read more
A customer in Alliance called about their GE washer leaking with water on the floor. Our diagnostic inspection revealed the leak was coming from the dispenser area, with water valve and drawer assembly issues identified. The Problem The customer reported leaking with the floor getting wet around their GE washer. Water was pooling on the … Read more
A North Canton homeowner called when their GE washer filled with water but would not agitate or spin and was not draining. We found the unit full of water with a drain pump that was activating but not actually pumping water out. The Problem The customer reported that their washer fills with water but will … Read more
We recently serviced an Admiral FEX831FS stackable washer in North Canton that was making a loud screech sound during the rinse and spin cycles. The customer described it as sounding like a bolt or belt was loose. Our diagnosis revealed the unit needed new seals and bearings to eliminate the noise. The Problem During the … Read more
A customer in Massillon called about their LG washer that wouldn’t spin out and was showing UE and OE error codes. This turned out to be a common programming issue with LG front load washers that required a control board replacement. The Problem The customer reported that their washer won’t spin out and was displaying … Read more
A Kenmore washer in Louisville made a weird noise mid-cycle and shut off, leaving the door locked with clothes inside. When we opened up the control panel, we found the main PCB had arced and failed completely. The Problem The washer made a “weird noise” in the middle of a cycle and shut off. The … Read more
A Whirlpool washer on Fohl Street Southwest in Canton was making a growling noise, wouldn’t spin, wouldn’t complete cycles, and wouldn’t shut off — the customer had to unplug the unit to stop it. We found the drain pump had failed and was causing all these symptoms. The Problem The customer reported their washer makes … Read more