A Canton homeowner called about their Kenmore washer with what they suspected were stripped gears. When we arrived at the David Avenue home, we discovered the real issue wasn’t mechanical failure — it was operator overload. The Problem The customer reported that gears may be stripped in their Kenmore washer. They were experiencing operational issues … Read more
We received a call from a Salem homeowner about their Maytag washer not completing wash cycle. When we arrived at the Brookview Drive location, we discovered the hot and cold water valves were swapped, which was generating an error and causing the machine to cycle extra long. The Problem The customer reported their Maytag washer … Read more
A customer in Alliance called about their Maytag washer that wouldn’t drain. When we arrived at the home on Hartley Road, we found the machine had been used to wash rugs that had fallen apart and plugged the drain pump. The Problem The washer wouldn’t drain after the customer had washed rugs in it. The … Read more
A customer in North Canton called about their Kenmore washer tripping the breaker, mostly on spin cycle. When we arrived at the Lorrell Avenue Southwest location, we found the timer was causing the electrical issue and replaced it to restore normal operation. The Problem The washer was tripping the breaker during operation. The problem occurred … Read more
A customer in North Canton called about their Kenmore Elite washer reporting something seems loose and the spin cycle not working correctly. Upon inspection, we found the wash tub is broken and not available for replacement. The Problem The customer reported something seems loose and the spin cycle not working correctly on their Kenmore Elite … Read more
We responded to a service call in Massillon, OH for an Admiral washer that wouldn’t drain properly. The customer reported their washing machine was full of water after the wash cycle. Our diagnosis revealed a failing transmission requiring appliance replacement. The Problem The customer contacted us because their washing machine was full of water after … Read more
A Canton homeowner called about their Admiral washer acting erratically — starting, stopping, needing to be restarted, and not filling very full. What we found wasn’t a problem with the washer itself, but with the electrical connection powering it. The Problem The customer described confusing behavior from their Admiral washer. It would start, then stop … Read more
A Whirlpool washer on Center Road in Homeworth was leaking water throughout the laundry room. Our diagnostic revealed a cracked tub that would require significant repair investment to restore proper operation. The Problem The customer reported their Whirlpool washer was leaking water. Water was escaping from the unit during wash cycles, creating potential damage to … Read more
A Canton homeowner called about their Frigidaire washer — the door won’t stay shut. When we arrived at the Walnut Avenue location, we found the door lock and latch assembly had failed, preventing the door from securing properly during wash cycles. The Problem The door won’t stay shut. This meant the washer couldn’t start or … Read more
A Whirlpool washer in New Philadelphia was experiencing multiple issues that made laundry day frustrating for the homeowner. The door was locked and wouldn’t release, clothes weren’t spinning properly, and water was barely trickling in despite new hoses. Our diagnosis revealed three failed components working together to create this perfect storm of washing machine problems. … Read more