Whirlpool Dryer Repair (Model WGD5500XW0) – Beloit, OH
The Whirlpool dryer was set up for natural gas while the home uses propane. We installed an LP conversion kit and calibrated burner settings for safe, efficient heat.
The Whirlpool dryer was set up for natural gas while the home uses propane. We installed an LP conversion kit and calibrated burner settings for safe, efficient heat.
The oven on this Frigidaire range wouldn’t heat due to a failed bake element. We confirmed 240V and replaced the element to restore baking.
The start relay failed, so the compressor wouldn’t start. Replacing the relay restored proper cooling and temperature control.
Dishwasher powered on but wouldn’t start. Main control board had 120V but no response; replacing the control restored normal operation.
Dryer ran and heated but made belt-slip noise. Failed idler pulley replaced and tested; unit operates quietly and normally.
The refrigerator’s water line was leaking. We cut out the damaged section and spliced new tubing to stop the leak.
Whirlpool washer WFW70HEBW0 was taking too long to finish. Cleared a clean-cycle error and secured a loose pressure hose rubbing the rotor to restore normal cycles.
The large burner on this GE range was heating poorly. Testing found the burner thermostat open; replacing the burner restored full, even heat.
Washer went out of balance during spin. We found weak shocks and a worn drive hub; recommended shock kit and hub replacement, but customer chose a new unit.
The dryer developed loud tumbling noises from a frayed belt, worn idler/rollers, and a rock in the glides. Replacing those parts and clearing debris restored quiet operation.