GE Dishwasher Repair (Model GSD2100V50W) – Louisville, OH
The dishwasher wasn’t cleaning because the water supply valve was shut off. We opened the valve; it now fills, washes, and tests good.
The dishwasher wasn’t cleaning because the water supply valve was shut off. We opened the valve; it now fills, washes, and tests good.
Washer wouldn’t drain or spin due to a failed lid switch. Replaced the lid switch; draining and spinning restored.
Washer would not spin or agitate and made a grinding noise. Replaced oil-contaminated belt and both pulleys; unit tested good and normal cycles restored.
The refrigerator wasn’t cooling or running. A failed cold control was found and replaced, restoring cooling; allow up to 24 hours to stabilize.
Washer wouldn’t power on despite a working outlet. A failed lid switch was replaced, restoring normal power and operation.
A customer in Paris, OH called because their Admiral upright freezer wasn’t cooling well. When we arrived at the Rummell Avenue location, our diagnosis revealed a failed evaporator fan that needed replacement. The Problem The customer reported that their freezer wasn’t cooling well. This is a common complaint when the evaporator fan stops working properly, … Read more
A Frigidaire oven on Parks Avenue Northeast in Louisville was displaying an Error F11 code. Our diagnosis revealed a faulty control board that needed replacement along with a power noise filter installation. The Problem The customer reported an Error F11 appearing on their Frigidaire oven display. This error code prevented normal oven operation and needed … Read more
We responded to a service call in East Canton for a Samsung dryer that wouldn’t operate. The customer reported their dryer was completely dead, but our diagnosis revealed the unit had overheated due to a lint-covered thermistor, which caused the thermal fuse to blow. The Problem The customer’s Samsung DV350AEW/XAA dryer won’t operate. The unit … Read more
We received a call about an Amana washer not getting water in Mechanicstown, OH. The customer suspected it probably needed a fill valve. When we arrived, we found the machine had one stored error code for the lock error, but the lid lock was functioning properly. The Problem The customer reported their Amana washer was … Read more
A Hartville customer called about their GE dryer GTDP180GD0WW that wouldn’t heat after another repair company quoted over $600 and claimed a wiring harness wasn’t available. Our inspection revealed an open igniter, cracked drive belt, and failed gas valve coils — all repairable with standard parts. The Problem The customer reported no heat whatsoever from … Read more