Samsung Dryer Repair (Model DV48H7400EWA2) – Louisville, OH
The heating element failed. Replaced the heater assembly (with high-limit and cycling thermostats) and serviced the rollers, restoring proper heat and cycling.
The heating element failed. Replaced the heater assembly (with high-limit and cycling thermostats) and serviced the rollers, restoring proper heat and cycling.
Dryer ran continuously after cycles due to a stuck relay on the control board. Replaced the control board and door switch to restore proper shutoff.
The GE dishwasher would not power on. Replacing the UI and main control boards restored operation; unit tests good.
Dryer would not start due to an open thermal fuse. Replaced the fuse; unit now starts and runs properly.
The dishwasher wasn’t cleaning because the water supply valve was shut off. We opened the valve; it now fills, washes, and tests good.
Washer wouldn’t drain or spin due to a failed lid switch. Replaced the lid switch; draining and spinning restored.
Washer would not spin or agitate and made a grinding noise. Replaced oil-contaminated belt and both pulleys; unit tested good and normal cycles restored.
The refrigerator wasn’t cooling or running. A failed cold control was found and replaced, restoring cooling; allow up to 24 hours to stabilize.
Washer wouldn’t power on despite a working outlet. A failed lid switch was replaced, restoring normal power and operation.
A customer in Paris, OH called because their Admiral upright freezer wasn’t cooling well. When we arrived at the Rummell Avenue location, our diagnosis revealed a failed evaporator fan that needed replacement. The Problem The customer reported that their freezer wasn’t cooling well. This is a common complaint when the evaporator fan stops working properly, … Read more