Louisville Appliance Repair recently completed a service call in North Canton, OH, where a Kenmore washer (model 110.27082603) was throwing an oL code at the end of the wash cycle and would not complete the final rinse. Samuel visited the home on Rose Lane Street Southwest and found that the drum shaft had corroded after … Read more
Louisville Appliance Repair recently completed a service call on W. Main St. in Malvern, OH, where a Samsung washer, model WF365BTBGWR/A2-01, was not filling with water and would not finish its cycles. Samuel visited the home, checked the valves and screens, and pulled the drain hose out of the wall drain, after which the washer … Read more
A North Canton, OH household on Orchard Avenue Northeast was dealing with a Maytag washer (model MVWX600BW0) that was making noise and leaving clothes soaking wet at the end of each cycle. Samuel visited the home and found that the hub in the spin basket had stripped, requiring a replacement hub part. After the repair … Read more
The washer was making a grrr sound and failing to spin out water. The issue was resolved by replacing the motor coupling.
The washer displayed a SUD error during the rinse cycle, preventing it from washing clothes. The issue was likely due to excessive soap usage or failing bearings.
The water valve on the washer wouldn’t shut off, leading to continuous water flow. Replacing the valve resolved the issue.
The washer displayed an OF error code and wasn’t draining properly. After replacing the cold water valve, the issue was resolved.
The washer was leaking from underneath but still functioning. A corroded hose was shortened to address the issue.
The washer displayed an error code F6 E2, indicating a user interface issue. Cleaning and sealing the board resolved the problem.
The washer stopped before completing the wash cycle, but after replacing the bearing kit and shaft, it now runs smoothly.