Samsung Washer Repair (Model WA40J3000AW/AA) – Canton, OH
The washer stopped after the wash cycle due to a loose drive belt, which was tightened to prevent further issues.
The washer stopped after the wash cycle due to a loose drive belt, which was tightened to prevent further issues.
The washer was not working, filled with water, and errored out. Replaced the shift actuator to restore functionality.
The washer was not filling with water, but otherwise cycled fine. The temperature selector switch was replaced to resolve the issue.
A Maytag washer in Canton, OH was filling with water but wouldn’t spin or agitate to wash the clothing. Our diagnosis revealed a broken wire on the motor that was preventing the wash action from engaging. The Problem The washer would start and fill with water normally, but it would not spin and actually wash … Read more
A Samsung washer at a home on Groton Street Northwest in Canton, OH was displaying an E3 error code and failing to spin. Samuel visited the residence to diagnose the issue and determined that the repair cost would exceed the practical value of the machine. Based on that assessment, replacing the washer was recommended as … Read more
The washer failed to power on, but after replacing the main control board, it was restored to full functionality.
The washer was not draining properly, and the issue was resolved by replacing the drain pump.
The washer leaked water during the rinse cycle, causing flooding. The issue was likely due to a clogged drain hose.
The washer was not spinning due to a drain hose issue. Adjusting the hose fixed the long fill error.
The washer failed to drain and spin, but the issue was resolved by replacing the drain pump.