Maytag Dryer Repair (Model MDE7400AYW) – Massillon, OH
Noisy operation traced to worn idler pulley and support roller. Replaced pulley and one roller and cleaned lint to restore smooth, quiet drying.
Noisy operation traced to worn idler pulley and support roller. Replaced pulley and one roller and cleaned lint to restore smooth, quiet drying.
This Whirlpool dryer wasn’t drying due to a failed timer causing intermittent heat. Replacing the timer restored consistent heat and normal drying.
Washer wouldn’t finish cycles due to a clogged cold water inlet screen. Cleaning the screen restored proper fill and the cycle now completes.
Freezer and fresh food sections were warming due to a failed defrost heater. Replacing the heater restored normal cooling.
Washer would not drain and showed OE error. A failed drain pump and a control board not sending power were replaced to restore proper draining.
Dryer stopped spinning after earlier work on the heater. A seized idler pulley was replaced, restoring drum rotation and normal operation.
The dryer stopped spinning due to a split drum that locked up. We installed an LG warranty replacement drum, restoring normal operation.
GE refrigerator in Alliance had no ice and weak cooling due to a failed evaporator fan motor. Replacing the fan restored airflow, cooling, and ice production.
In Canton, a Kenmore washer filled but wouldn’t advance or drain due to a failed lid switch. Replacing the lid switch restored normal operation.
The gas oven would not light due to a failed igniter. Replacing the oven igniter restored quick ignition and even heating.