A Maytag washer in Canton, OH was displaying F9E1 error code and draining water unexpectedly. The customer reported that it started draining the water out right before they left that morning, with the error code still flashing and the lid still locked. Our diagnosis revealed a failed drain harness causing the drainage malfunction. The Problem … Read more
A Maytag washer in Louisville wasn’t spinning on the spin cycle and had a rubber burning smell. When we arrived at East Broad Street, we found the problem was much worse than expected. The Problem The customer reported that the tub doesn’t spin on “Spin Cycle”, and there is rubber burning that I can smell. … Read more
A Canton homeowner called about their Maytag washer that would start sensing the load and then the light would go to done. After replacing the lid lock twice without success, we diagnosed capacitor failure with F5E3 and F7E1 error codes. The Problem The customer reported that the washer starts sensing the load and then the … Read more
We responded to a washer repair call in Alliance, OH for a GE WCCB1030J2WC that had a puzzling symptom. When lid is closed, drum oscillates slowly. Another company had already replaced the mode shifter, but the problem persisted. The Problem The customer reported that when lid is closed, drum oscillates slowly. This wasn’t normal wash … Read more
We received a service call for an Admiral washer in North Canton that had multiple issues. The washer filled with water will not running and will not drain, and also will not fill with hot water at all but will fill on other settings. Our diagnosis revealed this older unit needed extensive repairs. The Problem … Read more
A Kenmore washer on Opal Street in Louisville wasn’t completing its wash cycle. The machine filled with water but wouldn’t run the cycle. Our diagnosis revealed a failed lid switch preventing normal operation. The Problem The customer reported their washer filled with water but the cycle would not run. The machine was stuck after the … Read more
A Whirlpool washer repair call in Canton brought us to a coin-operated unit making a humming noise with no indicator lights. The customer reported the agitator wasn’t moving, but our diagnosis revealed a different issue entirely. The Problem The washer was making a humming noise and it sounded like the agitator was not moving. No … Read more
A Midea top load washer in Alliance was giving error code E2 when draining, forcing the homeowner to manually empty it when the cycle wouldn’t complete. Our diagnosis revealed a failed drain pump that needed replacement to restore normal operation. The Problem The customer reported that their Midea top load washer gives error code E2 … Read more
A Canton homeowner called about their 3-year-old Frigidaire washer that kept reading ERR with water coming from the bottom. They suspected damage from moving, as it worked fine before being transported to their new home. The Problem The customer reported that their washer keeps reading ERR and water is coming from the bottom. They think … Read more
A Maytag washer in Homeworth had a pen stuck between the tub and spin basket. The homeowners had already removed the agitator but couldn’t get the basket out to retrieve the pen. The Problem A pen fell between tub and spin basket. The customers had taken the agitator out but couldn’t get the basket out … Read more